CNC stainless steel parts processing requirements for cutting tools
http://www.aliexpress.com/store/418459 （ English Aliexpress Website)
The geometry parameter of the cutter, which is usually used in the selection of the rake angle, the angle and the angle of the cutter, is used to select the tool, which can be used to select the angle and the angle of the chip, which is suitable to be used in the selection.
http://www.aliexpress.com/store/418459 （ English Aliexpress Website)
CNC machining custom parts ,Can small orders
Payment : Paypal
A: I will quote to you if you can provide drawing to me from Email.
Email : luochaoaaa@hotmail.com
WhatsAPP: +8613649898902
B: The drawing is OK . ( 3D IGS, STEP CAD, PDF)
Machining of stainless steel cutter material, cutter bar must have sufficient strength and rigidity, in order to avoid in the process of cutting vibration and deformation. This requires the selection of appropriate knife bar cross-sectional area, should also with high strength material to manufacture the cutter bar, such as mining quenching of 45 steel or no. 50 steel.
Stainless steel parts processing of cutting tools for cutting part of the material
http://www.aliexpress.com/store/418459 （ English Aliexpress Website)
requirements for processing stainless steel, the cutting part of the cutting tool material with high wear resistance, and can keep its cutting performance at high temperature. The commonly used materials are: high speed steel and hard alloy.
http://www.aliexpress.com/store/418459 （ English Aliexpress Website)
Stainless steel parts processing factory, due to the high speed steel can only be maintained at 600 C below the cutting performance, so it is not suitable for high speed cutting, and only for processing in low speed conditions.
http://www.aliexpress.com/store/418459 （ English Aliexpress Website)
没有评论:
发表评论